Visit to CERN

Apart from having the honour to conduct our master theses for CERN, another great opportunity came along for my classmate Melchior and me – to pay a visit to the renowned facility! Our supervisor, professor Patrick Van Hees decided to join us for the visit, so the Lund University – CERN crew was complete.

After working hard on our projects for the first half of the semester, we knew that the upcoming visit was just what we needed – to get a better and clearer picture of the facility and its hazards, and to get some additional inspiration and motivation for the final stage of our thesis development.

Already landing in Geneva, we were amazed seeing the incredible Mont Blanc from the air, and realized how blessed people working and living in CERN and in the Alpes region were.

oznorclone tag: -3159157531965497878
Mont Blanc

The following morning, Lund University crew met up with IMFSE alumni Oriol Rios, currently working at CERN, and the visit could officially start. Our guide for the 1st day was Javier Cuadrado, working in CERN’s fire brigade, and volunteering as a tour guide in CERN. The visit started in the “museum” room where the first CERN’s accelerator Synchrocyclotron is exhibited. Synchrocyclotron provided beams for CERN’s first experiments in particle physics and nuclear physics, and it was used for remarkably long time – 33 years.

cof

The visit continued on to the ATLAS control room and subsequently to the CERN Control Centre. Already then, we started to get a real feel of the size and the complexity of the whole facility. Besides that it was interesting seeing the number of screens and people working in control centres – it reminded of sci-fi movies 😊.

sdr
clone tag: -5117329223649960077
clone tag: -4677966172812846714

cof
Art Arnalich explaining the “sci-fi” room

Next stop was the firefighter training centre having the real size model of the LHC tunnel. It was really positive and pleasant observing how seriously CERN takes both fire prevention and firefighting!

sdr
The LHC real size model

We continued on to the SM18 cryogen test facility. We were immediately stunned by the amount of equipment and apparatus present in the room – from numerous electrical cabinets and racks, over endless cables and wires, to magnets and parts of accelerators. Once again, we became aware of the huge size and complexity of CERN and of its uniqueness.

cof

cof

Next up was a presentation session by the people working with safety in CERN, where Oriol Rios presented what CERN fire engineering team is working on, how is the job organized, and who are the fire team members – namely:

Saverio La Mendola, Art Arnalich, Marco Andreini, Fabio Corsanego, Giordana Gai and Oriol Rios.

cof
Oriol Rios presenting the CERN fire team

The final part of the day was dedicated to visiting the core of the whole facility – CMS. The Compact Muon Solenoid (CMS) is a detector at the Large Hadron Collider (LHC), and as it is located 100m below ground connected to the experimental setup in tunnels, it can only be visited while experiments are not running. Luckily, we paid our visit during the winter technical stop, and we were welcomed for this exciting underground tour by CMS LEXGLIMOS (large experiments group leader in matters of safety) Niels Dupont.

cof
IMFSE crew at CERN
cof
Niels Dupont telling about CMS

As we were going below ground by the elevator, we were realizing only even more how extraordinary CERN was. After a tour through several chambers we arrived to probably the most impressive chamber all of us have witnessed where CMS was located. Seeing such a massive device with so many machines and detectors attached to it, and on top of that built 100m below ground chamber was staggering. Continuing with thinking of how many scientists and engineers from all fields had to provide their expert work in order to make something so complex actually operate smoothly. A truly inspiring moment that confirmed that there are no limits if knowledge and good organization are combined!

clone tag: -5084770274131706176
The CMS
dav
Excitement is obvious!

On the second day of our visit, we first went to the fire brigade. Being an ex-firefighter officer, Art Arnalich, together with Javier Cuadrado, showed us the main rooms in the brigade, explained us how does the brigade in such a big facility operate, and eventually showed us the equipment used by the CERN firefighters.

vatra
Art Arnalich and Javier Cuadrado sharing the secrets behind the CERN fire brigade! + Our fire engineer & firefighter Melchior getting the feel of the equipment!

The final stop for our visit was the Antimatter factory where scientists are “trapping” anti-protons and examining their properties, with e.g. the ACE experiment testing the use of antiprotons for cancer therapy. Another extraordinary laboratory.

Antimatter

At the end of the second day, we unfortunately had to say goodbye to our dear hosts from CERN, and to the facility itself. Nevertheless, the experience of visiting a facility where people from all over the world are using and developing high-end knowledge in solving the most complex problems was really motivating and definitely gave us a good inspiration for the start of our fire safety engineering careers.

oznorclone tag: -8559735548108312815
Bye CERN, bye dear fire team! Thanks for having us 🙂 
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s